| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190 |
- LABCENTER PROTEUS TOOL INFORMATION FILE
- =======================================
- In case of difficulty, please e-mail support@labcenter.co.uk
- Tool set up for Proteus layout 'dosimeter_evalboard.pdsprj'.
- CADCAM generated at 16:53:17 on 14 ñåíòÿáðÿ 2021 ã..
- File List
- ---------
- Top Copper : dosimeter_evalboard - CADCAM Top Copper.GBR
- Bottom Copper : dosimeter_evalboard - CADCAM Bottom Copper.GBR
- Top Silk Screen : dosimeter_evalboard - CADCAM Top Silk Screen.GBR
- Bottom Silk Screen : dosimeter_evalboard - CADCAM Bottom Silk Screen.GBR
- Top Solder Resist : dosimeter_evalboard - CADCAM Top Solder Resist.GBR
- Bottom Solder Resist : dosimeter_evalboard - CADCAM Bottom Solder Resist.GBR
- Top SMT Paste : dosimeter_evalboard - CADCAM Top SMT Paste.GBR
- Bottom SMT Paste : dosimeter_evalboard - CADCAM Bottom SMT Paste.GBR
- Top Assembly : dosimeter_evalboard - CADCAM Top Assembly.GBR
- Bottom Assembly : dosimeter_evalboard - CADCAM Bottom Assembly.GBR
- Drill : dosimeter_evalboard - CADCAM Drill.DRL
- Netlist : dosimeter_evalboard - CADCAM Netlist.IPC
- Photoplotter Setup
- ------------------
- Format: RS274X, ASCII, 4.3, metric, absolute, eob=*, LZO
- Bounds: -50mm -50mm 50mm 50mm
- Notes: D=Diameter, S=Side, W=Width, H=Height, C=Chamfer, I=Index
- D10 CIRCLE D=0.45mm DRAW
- D11 CIRCLE D=0.25mm DRAW
- D12 CIRCLE D=0.96mm DRAW
- D13 CIRCLE D=0.7mm FLASH
- D14 CIRCLE D=1mm FLASH
- D15 CIRCLE D=4.572mm FLASH
- D16 RECT W=1.48mm H=0.3mm FLASH
- D17 RECT W=0.3mm H=1.48mm FLASH
- D18 RECT W=1.5mm H=0.45mm FLASH
- D19 RECT W=0.6mm H=1.15mm FLASH
- D70 RECT W=1.2mm H=0.6mm FLASH
- D71 RECT W=0.508mm H=0.635mm FLASH
- D20 RECT W=1.52mm H=0.65mm FLASH
- D21 RECT W=1.25mm H=0.6mm FLASH
- D22 RECT W=0.65mm H=1.52mm FLASH
- D23 RECT W=0.45mm H=1.38mm FLASH
- D24 RECT W=1.48mm H=2.1mm FLASH
- D25 RECT W=1.18mm H=1.9mm FLASH
- D26 RECT W=2.38mm H=1.9mm FLASH
- D27 SQUARE S=1.9mm FLASH
- D28 RECT W=0.5mm H=0.82mm FLASH
- D29 RECT W=0.82mm H=0.5mm FLASH
- D72 RECT W=1.6mm H=2.1mm FLASH
- D73 RECT W=1.5mm H=3mm FLASH
- D30 SQUARE S=1.5mm FLASH
- D31 RECT W=2.1mm H=1.6mm FLASH
- D32 RECT W=1.1mm H=1.85mm FLASH
- D33 RECT W=1.05mm H=0.6mm FLASH
- D34 RECT W=0.6mm H=1.05mm FLASH
- D35 RECT W=2.1mm H=1.4mm FLASH
- D36 RECT W=1.448mm H=1.143mm FLASH
- D37 RECT W=2.3mm H=2.5mm FLASH
- D38 RECT W=1.143mm H=1.448mm FLASH
- D39 RECT W=0.97mm H=1.47mm FLASH
- D40 RECT W=1.39mm H=0.97mm FLASH
- D41 RECT W=2.72mm H=0.82mm FLASH
- D42 RECT W=0.97mm H=1.39mm FLASH
- D43 RECT W=1.27mm H=1.016mm FLASH
- D44 RECT W=1.016mm H=1.27mm FLASH
- D45 RECT W=1mm H=1.8mm FLASH
- D46 RECT W=2.6mm H=1.9mm FLASH
- D47 RECT W=1.39mm H=0.91mm FLASH
- D48 RECT W=0.9mm H=1.4mm FLASH
- D49 RECT W=1.448mm H=0.94mm FLASH
- D50 CIRCLE D=0.203mm DRAW
- D51 CIRCLE D=0.2mm DRAW
- D52 CIRCLE D=0.1mm DRAW
- D53 CIRCLE D=0.954mm FLASH
- D54 CIRCLE D=1.254mm FLASH
- D55 CIRCLE D=5.08mm FLASH
- D56 PPAD W=1.48mm H=0.3mm I=0 FLASH
- D57 PPAD W=0.3mm H=1.48mm I=1 FLASH
- D58 PPAD W=1.5mm H=0.45mm I=2 FLASH
- D59 PPAD W=0.6mm H=1.15mm I=3 FLASH
- D60 PPAD W=1.2mm H=0.6mm I=4 FLASH
- D61 PPAD W=0.762mm H=0.889mm I=5 FLASH
- D62 PPAD W=1.52mm H=0.65mm I=6 FLASH
- D63 PPAD W=1.25mm H=0.6mm I=7 FLASH
- D64 PPAD W=0.65mm H=1.52mm I=8 FLASH
- D65 PPAD W=0.45mm H=1.38mm I=9 FLASH
- D66 PPAD W=1.48mm H=2.1mm I=10 FLASH
- D67 PPAD W=1.18mm H=1.9mm I=11 FLASH
- D68 PPAD W=2.38mm H=1.9mm I=12 FLASH
- D69 PPAD W=2.154mm H=2.154mm I=13 FLASH
- D74 PPAD W=0.5mm H=0.82mm I=14 FLASH
- D75 PPAD W=0.82mm H=0.5mm I=15 FLASH
- D76 PPAD W=1.6mm H=2.1mm I=16 FLASH
- D77 PPAD W=1.5mm H=3mm I=17 FLASH
- D78 PPAD W=1.5mm H=1.5mm I=18 FLASH
- D79 PPAD W=2.1mm H=1.6mm I=19 FLASH
- D80 PPAD W=1.1mm H=1.85mm I=20 FLASH
- D81 PPAD W=1.05mm H=0.6mm I=21 FLASH
- D82 PPAD W=0.6mm H=1.05mm I=22 FLASH
- D83 PPAD W=1.448mm H=1.143mm I=23 FLASH
- D84 PPAD W=2.3mm H=2.5mm I=24 FLASH
- D85 PPAD W=1.143mm H=1.448mm I=25 FLASH
- D86 PPAD W=0.97mm H=1.47mm I=26 FLASH
- D87 PPAD W=1.39mm H=0.97mm I=27 FLASH
- D88 PPAD W=2.72mm H=0.82mm I=28 FLASH
- D89 PPAD W=0.97mm H=1.39mm I=29 FLASH
- D90 PPAD W=1.524mm H=1.27mm I=30 FLASH
- D91 PPAD W=1.27mm H=1.524mm I=31 FLASH
- D92 PPAD W=1mm H=1.8mm I=32 FLASH
- D93 PPAD W=2.6mm H=1.9mm I=33 FLASH
- D94 PPAD W=2.154mm H=2.154mm I=34 FLASH
- D95 PPAD W=1.39mm H=0.91mm I=35 FLASH
- D96 PPAD W=0.9mm H=1.4mm I=36 FLASH
- D97 PPAD W=1.448mm H=0.94mm I=37 FLASH
- D98 PPAD W=1.448mm H=1.143mm I=38 FLASH
- D99 PPAD W=1.143mm H=1.448mm I=39 FLASH
- D100 CIRCLE D=0.05mm DRAW
- D101 CIRCLE D=0.27mm DRAW
- D102 CIRCLE D=0.349mm DRAW
- D103 CIRCLE D=0.405mm DRAW
- D104 CIRCLE D=0.217mm DRAW
- D105 CIRCLE D=0.46mm DRAW
- D106 CIRCLE D=0.111mm DRAW
- D107 CIRCLE D=0.48mm DRAW
- D108 CIRCLE D=0.114mm DRAW
- D109 CIRCLE D=0.254mm DRAW
- D110 CIRCLE D=0.093mm DRAW
- D111 CIRCLE D=0.585mm DRAW
- D112 CIRCLE D=0.195mm DRAW
- D113 CIRCLE D=0.5mm DRAW
- D114 CIRCLE D=0.267mm DRAW
- D115 CIRCLE D=0.76mm DRAW
- D116 CIRCLE D=0.356mm DRAW
- D117 CIRCLE D=0.328mm DRAW
- D118 CIRCLE D=0.065mm DRAW
- D119 CIRCLE D=0.84mm DRAW
- D120 CIRCLE D=0.215mm DRAW
- D121 CIRCLE D=1.2mm DRAW
- D122 CIRCLE D=0.183mm DRAW
- D123 CIRCLE D=0.74mm DRAW
- D124 CIRCLE D=0.42mm DRAW
- D125 CIRCLE D=0.112mm DRAW
- D126 CIRCLE D=0.115mm DRAW
- D127 CIRCLE D=0.301mm DRAW
- D128 CIRCLE D=0.178mm DRAW
- D129 CIRCLE D=0.579mm DRAW
- D130 CIRCLE D=0.073mm DRAW
- D131 CIRCLE D=1mm DRAW
- D132 CIRCLE D=0.234mm DRAW
- D133 CIRCLE D=0.588mm DRAW
- D134 CIRCLE D=0.061mm DRAW
- D135 CIRCLE D=0.556mm DRAW
- D136 CIRCLE D=0.738mm DRAW
- D137 CIRCLE D=0.104mm DRAW
- D138 CIRCLE D=0.508mm DRAW
- D139 CIRCLE D=0.72mm DRAW
- D140 CIRCLE D=0.123mm DRAW
- D141 CIRCLE D=1.04mm DRAW
- D142 CIRCLE D=0.182mm DRAW
- D143 CIRCLE D=0.083mm DRAW
- D144 CIRCLE D=0.059mm DRAW
- D145 CIRCLE D=0.56mm DRAW
- D146 CIRCLE D=0.081mm DRAW
- D147 CIRCLE D=0.076mm DRAW
- D148 CIRCLE D=0.127mm DRAW
- D149 CIRCLE D=0.064mm DRAW
- NC Drill Setup
- --------------
- Format: Excellon, ASCII, 4.3, metric, absolute, eob=<CR><LF>, no zero suppression.
- Notes: Tool sizes are diameters. Layer sets are in brackets - 0=TOP, 15=BOTTOM, 1-14=INNER.
- T01 0.3mm (0-15) Plated
- T02 0.5mm (0-15) Plated
- T03 3mm (0-15) Plated
- T04 1mm (0-15) Plated
- Layer Stackup
- -------------
- Top Solder Resist : 0.01mm Resist
- Top Copper : 0.018mm Copper
- Core : 1.55mm FR4
- Bottom Copper : 0.018mm Copper
- Bottom Solder Resist : 0.01mm Resist
- [END OF FILE]
|
